Yeah Baby Goods Footrest

Yeah Baby Goods patented adjustable highchair footrests provide an option for people who love the inexpensive and minimal IKEA highchair but also want to give their babies the foot support they need. Like all Yeah Baby Goods highchair accessories, it was designed with functionality and aesthetics in mind.

• designed in the US
• each set includes 1 wooden footrest, 4 black 1-inch o-rings, and 2 white support clamps
• easy to wipe clean surface
• adjustable - no tools needed
• quick and simple installation
• footrest spacers for extension sold separately
• U.S. Patent No. D964,759

See: Yeah Baby Goods Leg Wrap

Wood naturally varies in hue, saturation and darkness; therefore, these same variances may occur in our footrests. For this reason, some footrests might not be an exact match with our vinyl leg wraps. Footrests may also have a seam where the color and grain vary.

Care

- clean with soap and water as needed

Installation (Footrest)

https://www.youtube.com/watch?v=uS-MiG7nQV8&ab_channel=YeahBabyGoods

1) With the highchair fully assembled, roll one o-ring onto each of the front legs, starting at the bottom and moving the o-ring to the top of the leg. These are your upper o-rings. (The upper rings are optional and only necessary if your child kicks the footrest from underneath.)

2) Roll the second o-ring onto each of the front legs, stopping about 1/3 of the way up to the leg. These are your lower o-rings.

3) In order for the footrest to lay flat, the groove on the underside of the footrest must be oriented correctly. One side of the groove has a deeper cut than the other side. Make sure the side with the deeper cut is facing forward, then insert the footrest between the two o-rings on each leg by holding it diagonally until both legs fit between the notched cutouts on the ends of the footrest.

4) Level the footrest approximately two-thirds of the way up the leg, then roll the lower o-rings up to the bottom of the footrest.

5) Adjust the footrest up or down based on your child's height. The child's knees should sit at a 90 degree angle.

6) Fasten the support clamps over the bottom two-rings. The o-ring should fit completely inside the groove of the clamp. If using the upper o-rings, slide them down to rest on top of the footrest.

Footrest Spacers

Extend the use of your footrest! The YBG Footrest Spacer prevents the footrest from falling at a lower position and keeps the footrest from sliding side to side.

• includes 2 footrest spacers

Safety Warning: Please keep unused spacers out children's reach to avoid choking risk.

Installation (Footrest Spacers)

As you lower the YBG footrest, a gap will form between the leg of the highchair and the footrest. Fit the spacer in the gap on one or both sides, depending on how low the footrest is. The spacer should fit snugly in the curve of the footrest.